Heavy Duty Decorative Sign Post 90 inches High 4x4 Post with 12x12 Base Plate

90" Tall Sign Post for Directional Signs

The 90"  4" x 4" extruded aluminum post has a 0.115 wall thickness and a welded 12" x 12" aluminum base plate with gussets. The Post features a fluted edge design and features a mounting slot on four sides for sign mounting. Each post includes an end cap and locking square to secure the sign in place. Duranodic Bronze finish, custom paint colors are available. This sign-post features a mounting slot on two sides for sign mounting with an end cap and locking square to secure the sign in place. The post has s 12" x 12" aluminum base plate for surface mounting.

Specifications

• Dimensions: 90" H x 12" W x 12" D with base plate
• Base plate" 12" x 12" x 3/16" thick with predrilled anchoring holes
• Weight: Approximately 40 lbs
• Finish: Duranodic Bronze
  
• Material: Extruded aluminum post with mounting slots on four sides
• Sign mounting hardware and set screw for securing sign to post is included

Sign Post Mounting Recommendations

• Single Post: Use a single post to center or flag mount signs up to 26"wide. A bracket for attaching the post to the sign will be installed on the sign at the factory.
• Double Post: Use post with or without a base plate to side mount or projection mount for signs wider than 26". Posts should be mounted to one or both sides of the sign and travel the full width of the sign.
• Hanging Sign: Use single or double posts with a base plate for hanging a sign from the ceiling, pendant style.
• Projection Mount: Use single or double posts with a base plate for projection mounting.

Posts with base plates are available in three standard lengths: 40", 60", and 90" or in custom lengths up to 90". Posts for direct burial mounting (without base plates) are available in four standard lengths: 40", 60", 90" and 120" or in custom lengths up to 120".